Global gear reducer market is segmented into types and geographical segmentation. Gear-reducers also known as speed reducers are a component of many mechanical, electrical, and hydraulic motors. Normally a gear or series of gear are combined in a way such that regulation of the torque can take place easily. A gear reducer is a mechanism by which the output of a high-speed motor or engine is redirected to turn another mechanical component at a lower rotational speed and at a higher torque. Gear reducers are devices that can take several forms.
They are also referred to as gear boxes or gear shifters and possess simple transmissions. Gear reducers also offer mechanical safety by dropping the speed of rotating equipment. In its simplest form, gear reduction takes place in set ratios that are connected to a characteristic value of the input and output gear components.
The automobile presents an excellent example of gear reduction. Interior combustion engines must operate at top speeds to continue with smooth power generation. When the vehicle is stopped, slowing or traveling slowly, the torque around the engine causes the wheels to spin or the car to gain speed or even reason the loss of steering control. Through the use of a gear reducer, the energy can be used to overcome the inactivity of the stopped vehicle, decrease the momentum of a slowing vehicle or allow heavier loads to be towed but at a lower velocity.
On the surface, it may seem that gears are being reduced in amount or size, which is moderately true. When a rotary machine such as an engine or electric motor needs the output speed concentrated and torque increased, gears are frequently used to accomplish the desired result. Gear lessening specifically refers to the speed of the rotary machine; the rotational speed of the rotary machine is reduced by separating it by a gear ratio greater than 1:1.
A gear ratio greater than 1:1 is achieved when a smaller gear (reduced size) with less number of teeth meshes and drives a larger gear with greater number of teeth. Gear reduction has the opposite effect on torque. The rotary machine’s output torque is increased by multiplying the torque by the gear ratio.
On the other hand, in many applications, gear reduction reduces speed and increases torque. In the other applications, gear reduction is used to increase speed and reduce torque. Generators in wind turbines use gear reduction in this manner to exchange a comparatively slow turbine blade speed to a high speed capable of generating electricity. These applications use gearboxes that are assembled contradictory of those in applications that lessen speed and augment torque.
The gear reduction is done by many reducer types. They are capable of attaining gear reduction including, but not limited to, parallel shaft, planetary and right-angle worm gearboxes. In parallel shaft gearboxes (or reducers), a pinion gear with a certain number of teeth meshes and drives a larger gear with a greater number of teeth. The reduction or gear ratio is calculated by dividing the number of teeth on the large gear by the number of teeth on the small gear.
Global Gear Reducer Market is segmented By Types into Single Reduction Gear, Double reduction gear. In Single Reduction gear, the arrangement consists of only one pair of gears. The reduction gear box consists of ports throughout which the propeller shafts and engine shaft enters the assembly. A small gear known as a pinion is driven by the external engine shaft. The pinion straight drives a large gear mounted on the propeller shaft. The speed is adjusted by decreasing the ratio of the speed to the diameter of pinion and gear proportional. In general, a single gear assembly has a gear double the size of pinion.
The Double Reduction Gears are normally used in applications related tohigh speeds. In this accusation, the pinion is associated with the input shaft using a flexible coupling. The pinion is connected to an in-between gear known as the first reduction gear. The first reduction gear is then connected to a low speed pinion with the help of one more shaft.
Global Gear Reducer Market is segmented By Geographical Region into North America, China, Europe, Japan, India, and Southeast Asia. The Key Players include IPTS, NORD, SUMER, SANKYO, TWG, Siemens, Brevini Riduttori, VARVEL, Bonfiglioli, Tsubak, Kahlig Antriebstechnik GmbH, JVL, Nidec-SHIMPO, YUK, TGB and I.CH MOTION.
Geographically, this report is segmented into several key Regions, with production, consumption, revenue (million USD), market share and growth rate of Gear Reducer in these regions, from 2013 to 2025 (forecast), covering
• North America
• Southeast Asia
Global Gear Reducer market competition by top manufacturers, with production, price, revenue (value) and market share for each manufacturer; the top players including
• Apex Dynamics
• ATEK Antriebstechnik
• B. Ketterer Sohne GmbH & Co. KG
• Transtecno Group
• Boston Gear
• Davall Gears
• TECO-Westinghouse Motors
• Nippon Gear
• Fixed Star Group Company
• Nosen M&E Technology
On the basis of product, this report displays the production, revenue, price, market share and growth rate of each type, primarily split into
• Bevel Gear Reducers
• Worm Gear Reducer
• Helical Gear Reducers
On the basis of the end users/applications, this report focuses on the status and outlook for major applications/end users, consumption (sales), market share and growth rate for each application, including
• Commercial vehicles
• Industrial construction
• Plant engineering
Research Support Specialist, USA