The Global Manual Bearing Puller Market is expected to display majestic growth at a rising CAGR in forthcoming period. The Manual Bearing Puller market is observing rapid growth because of an augmented need to remove bearing sets from a machine shaft or from a blind bearing hole. A practical application is that of removing bearing sets from a rotating shaft of a cars transmission and the hardest part here is the tools used here are harder than the bolts they are used on. This ensures the tools do not break on use with the bolts.
The Manual Bearing Puller are generally hand-powered and use handle on the turn screw or are hand-powered with a hex male screw to turn sockets. Some bearing pullers are hydraulically powered using a hydraulic-powered piston which presses against a shaft-end the bearing is on. There are some instances of small-bore pistons that are needed for horse power motors and fishing reels. The puller has arms with extensions that grips the inner race of the shaft with outer race not secured well on the bearing assembly. There include three types of bearing pullers including bearing splitter plates, two and three arm bearing pullers and internal pullers.
Bearing splitter plates are the most popular bearing puller in use and they are the push and pop type comprising of two half plates with a hole in the center and a simultaneous upward and downward thrust will get the job done. A gear or hub at the back end of the bearing gives the downward thrust of the piston some leverage that maximizes the thrusting ratio.
Two and three arm pullers are the most popular amongst the pullers in use today have curved arms that get a better grip on the bearings race and pushes on shaft top and arms and fingers are interchangeable. Internal bearing pullers are made to extract a bearing set, a busing or a bronze sleeve from a blind hole. They are dent pullers and have a notch at the side of the shaft that moves the piston up and down.
Segmentation of Manual Bearing Puller market by type includes two-arm, three –arm and others. Segmentation of manual bearing puller battery by applications includes automobile industry, equipment manufacturing industry and maintenance and others. Segmentation by region includes North America, Europe, Asia Pacific, MEA and Latin America. The key industrial players in Manual Bearing Puller market includes SKF maintenance and lubrication products, SPX hydraulic technologies, FACOM, Gedore Tool Cebter KG, HAzet and STAHLVILLE.
Geographically, this report is segmented into several key Regions, with production, consumption, revenue (million USD), market share and growth rate of Manual Bearing Puller in these regions, from 2013 to 2025 (forecast), covering
• North America
• Southeast Asia
Global Manual Bearing Puller market competition by top manufacturers, with production, price, revenue (value) and market share for each manufacturer; the top players including
• BEGA SPECIAL TOOLS
• SAM OUTILLAGE
• SKF Maintenance and Lubrication Products
• SPX Hydraulic Technologies
• Zinko Hydraulic Jack
• GEDORE Tool Center KG
• GRIPHOLD ENGINEERING
• Holmatro Industrial Equipment BV
On the basis of product, this report displays the production, revenue, price, market share and growth rate of each type, primarily split into
On the basis of the end users/applications, this report focuses on the status and outlook for major applications/end users, consumption (sales), market share and growth rate for each application, including
• Automobile Industry
• Equipment Manufacturing Industry
Research Support Specialist, USA